Notes aren't recorded as played?
If you have trouble with notes getting cut short when recording a performance from the keyboard, it may be due to Zone settings.
If more than one Zone is active and these Zones have overlapping key ranges, you may experience some strange behavior when recording performances in Reason or other DAWs.
To solve this problem, press the Internal button, then press the display button labeled 'Zones'. On the Zones page, if you see a red bar over any of the labels for the display buttons (Zone1, Zone2, Zone3, Zone4), press those buttons to deactivate the active Zones.
If you are experiencing this issue immediately after updating the firmware on your Panorama, we suggest that you perform a factory reset.
1. Turn off Panorama
2. hold the 'Patch-' and 'Patch+' buttons
3. while holding those buttons, turn Panorama back on
4. continue to hold the 'Patch-' and 'Patch+' buttons until you see a message that says "Unit is restoring factory content to all presets..."
Your Panorama has now been restored to factory default settings.